Non-stick coating spray, surface coating, non-stick finish, non-stick coating material, wear-resistant and anti-adhesive spray.

The traditionally used Teflon coating exhibits excessive peel strength against hot melt adhesives, resulting in insignificant non-stick performance and inadequate wear resistance. This leads to a rapid loss of non-stick properties, lower production efficiency, shorter maintenance cycles, and increased costs.

Wear-resistant coating repair for fan impeller blades

Our company provides repair services for worn areas on fan impellers in cement plants, power plants, and other facilities, as well as surface reinforcement coatings for new impellers, which can extend the service life of impellers by several times.

The induced-draft fan is one of the boiler’s primary auxiliary devices, responsible for continuously conveying gases. The main failure mode of the induced-draft fan is erosive wear caused by solid particles in the flue gas impacting and eroding its blades. Failure of the fan blades can lead to reduced operational efficiency or even complete shutdown.

Tungsten carbide spray-coated wire-drawing tower, wire-drawing cylinder spray coating processing, and wear-resistant spray coating processing for take-up reels.

By employing the supersonic flame spraying process to coat the surfaces of parts such as drawing machine tower pulleys, guide pulleys, wire-drawing cylinders, winding reels, and guide grooves with tungsten carbide ceramic coatings, the surface hardness can reach HRc75—significantly higher than the wear resistance of tool steels or chilled cast irons.

Parts such as wire-drawing wheels, wire-drawing tower pulleys, wire-drawing cylinders, winding reels, and guide grooves used in metal wire-drawing equipment are coated with carbide ceramic coatings on their surfaces. For workpieces with particularly high wear resistance requirements, imported supersonic equipment can be used to apply tungsten carbide (hard alloy) coatings, achieving a hardness of up to HRC7.5.

We offer a range of thermal spray services, including supersonic spraying equipment from U.S. PRAXAIR and plasma equipment from U.S. Miller, all imported from Europe and the U.S. Our thermal spray coatings feature high bonding strength, exceptional density, and guaranteed superior quality.

Wear-resistant roller coated with tungsten carbide.

Generally, the tooth tips of corrugated rollers wear out quickly and extensively, resulting in a significantly reduced diameter after repair. In contrast, tungsten carbide corrugated rollers, thanks to their exceptional wear resistance and minimal wear, maintain nearly unchanged diameters even after repair.

Tungsten Carbide (WC-Co) Coating for Corrugated Rollers

The corrugating roll is a key component in the corrugated cardboard production line. The rationality of its corrugation pattern, manufacturing precision, wear resistance, service life, and operating speed are the primary technical indicators for assessing its quality and cost-effectiveness, directly impacting the product quality and economic benefits of the enterprise.