Turbine blade coating equipment / Gas-supersonic thermal spraying equipment

Supersonic Spray Equipment, Tungsten Carbide Coating, HVOF Spray Equipment

Category:

Coating spray equipment

Supersonic spraying equipment

Gas turbine

Corrosion-resistant and wear-resistant

Key words:

超音速喷涂设备

喷涂碳化钨

HVOF喷涂设备

叶片喷涂叶轮耐磨喷涂耐磨叶轮喷涂加工

Request for quotation E-mail:CarrieFeng07@outlook.com

Product Description

Turbine blade coating equipment, gas-supersonic thermal spraying equipment, tungsten carbide coating equipment

The main principle of the SX-5000 supersonic flame spraying equipment is as follows: A mixed gas of fuel gas and oxygen is delivered under high pressure to an ignition zone located at the nozzle outlet, where it is ignited. The annular flow of hot gas is compressed by an external stream of pressurized air, causing it to accelerate and form a supersonic flame. Powder particles, carried by a carrier gas, are conveyed to the nozzle outlet and then introduced into the combustion flame, where they deposit to form a coating.

The SX-5000 supersonic flame spraying equipment consists of five main components: the spray gun, powder feeder, control system, heat exchange system, and various pipelines. It is a compact spraying device characterized by simple operation, stable performance, low fuel consumption, and excellent coating quality.

One. SX-5000 Control Cabinet

The SX-5000 supersonic flame spraying system boasts an advanced level comparable to similar foreign products, featuring superior performance and ease of operation. It enables automated operation of the spraying process and provides real-time monitoring of the system, dynamically controlling the operation of the spray gun and allowing immediate response to any system faults.

Two . SX-5000 Powder Feeder

The SX-5000 supersonic high-speed flame spraying powder feeder is a device used to store spraying powder and deliver it to the spray gun according to process requirements. It uses nitrogen as the powder-feeding gas; the spraying powder is atomized and vibrated by the powder-feeding gas, enabling the powder to be conveyed to the outlet of the feeder and then, together with the powder-feeding gas, exit the powder feeder and enter the spray gun. The powder-feed rate can be adjusted by regulating the potentiometer on the control cabinet panel.

Three . SX-5000 Cooling System

The dual-compressor drive reduces the overall machine size, giving you more space. It is primarily used to effectively cool the nozzle and sealing rings, thereby extending their service life.

Four . SX-5000 spray gun

Equipped with a dual-purpose manual and machine-use spray gun, the working gases are oxygen and propane. The spray gun weighs approximately 2 kg, and the spray particle velocity is ≥450 m/s. The spray gun can operate stably for extended periods.